// Copyright 2019 Google LLC
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// https://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
// Note: this file is purely for documentation. Any contents are not expected
// to be loaded as the JS file.
/**
* HTTP request.
*
* The task will be pushed to the worker as an HTTP request. If the worker
* or the redirected worker acknowledges the task by returning a successful HTTP
* response code ([`200` - `299`]), the task will removed from the queue. If
* any other HTTP response code is returned or no response is received, the
* task will be retried according to the following:
*
* * User-specified throttling: retry configuration,
* rate limits, and the queue's state.
*
* * System throttling: To prevent the worker from overloading, Cloud Tasks may
* temporarily reduce the queue's effective rate. User-specified settings
* will not be changed.
*
* System throttling happens because:
*
* * Cloud Tasks backs off on all errors. Normally the backoff specified in
* rate limits will be used. But if the worker returns
* `429` (Too Many Requests), `503` (Service Unavailable), or the rate of
* errors is high, Cloud Tasks will use a higher backoff rate. The retry
* specified in the `Retry-After` HTTP response header is considered.
*
* * To prevent traffic spikes and to smooth sudden large traffic spikes,
* dispatches ramp up slowly when the queue is newly created or idle and
* if large numbers of tasks suddenly become available to dispatch (due to
* spikes in create task rates, the queue being unpaused, or many tasks
* that are scheduled at the same time).
*
* @property {string} url
* Required. The full url path that the request will be sent to.
*
* This string must begin with either "http://" or "https://". Some examples
* are: `http://acme.com` and `https://acme.com/sales:8080`. Cloud Tasks will
* encode some characters for safety and compatibility. The maximum allowed
* URL length is 2083 characters after encoding.
*
* The `Location` header response from a redirect response [`300` - `399`]
* may be followed. The redirect is not counted as a separate attempt.
*
* @property {number} httpMethod
* The HTTP method to use for the request. The default is POST.
*
* The number should be among the values of [HttpMethod]{@link google.cloud.tasks.v2.HttpMethod}
*
* @property {Object.<string, string>} headers
* HTTP request headers.
*
* This map contains the header field names and values.
* Headers can be set when the
* task is created.
*
* These headers represent a subset of the headers that will accompany the
* task's HTTP request. Some HTTP request headers will be ignored or replaced.
*
* A partial list of headers that will be ignored or replaced is:
*
* * Host: This will be computed by Cloud Tasks and derived from
* HttpRequest.url.
* * Content-Length: This will be computed by Cloud Tasks.
* * User-Agent: This will be set to `"Google-Cloud-Tasks"`.
* * X-Google-*: Google use only.
* * X-AppEngine-*: Google use only.
*
* `Content-Type` won't be set by Cloud Tasks. You can explicitly set
* `Content-Type` to a media type when the
* task is created.
* For example, `Content-Type` can be set to `"application/octet-stream"` or
* `"application/json"`.
*
* Headers which can have multiple values (according to RFC2616) can be
* specified using comma-separated values.
*
* The size of the headers must be less than 80KB.
*
* @property {Buffer} body
* HTTP request body.
*
* A request body is allowed only if the
* HTTP method is POST, PUT, or PATCH. It is an
* error to set body on a task with an incompatible HttpMethod.
*
* @property {Object} oauthToken
* If specified, an
* [OAuth token](https://developers.google.com/identity/protocols/OAuth2)
* will be generated and attached as an `Authorization` header in the HTTP
* request.
*
* This type of authorization should generally only be used when calling
* Google APIs hosted on *.googleapis.com.
*
* This object should have the same structure as [OAuthToken]{@link google.cloud.tasks.v2.OAuthToken}
*
* @property {Object} oidcToken
* If specified, an
* [OIDC](https://developers.google.com/identity/protocols/OpenIDConnect)
* token will be generated and attached as an `Authorization` header in the
* HTTP request.
*
* This type of authorization can be used for many scenarios, including
* calling Cloud Run, or endpoints where you intend to validate the token
* yourself.
*
* This object should have the same structure as [OidcToken]{@link google.cloud.tasks.v2.OidcToken}
*
* @typedef HttpRequest
* @memberof google.cloud.tasks.v2
* @see [google.cloud.tasks.v2.HttpRequest definition in proto format]{@link https://github.com/googleapis/googleapis/blob/master/google/cloud/tasks/v2/target.proto}
*/
const HttpRequest = {
// This is for documentation. Actual contents will be loaded by gRPC.
};
/**
* App Engine HTTP request.
*
* The message defines the HTTP request that is sent to an App Engine app when
* the task is dispatched.
*
* Using AppEngineHttpRequest requires
* [`appengine.applications.get`](https://cloud.google.com/appengine/docs/admin-api/access-control)
* Google IAM permission for the project
* and the following scope:
*
* `https://www.googleapis.com/auth/cloud-platform`
*
* The task will be delivered to the App Engine app which belongs to the same
* project as the queue. For more information, see
* [How Requests are
* Routed](https://cloud.google.com/appengine/docs/standard/python/how-requests-are-routed)
* and how routing is affected by
* [dispatch
* files](https://cloud.google.com/appengine/docs/python/config/dispatchref).
* Traffic is encrypted during transport and never leaves Google datacenters.
* Because this traffic is carried over a communication mechanism internal to
* Google, you cannot explicitly set the protocol (for example, HTTP or HTTPS).
* The request to the handler, however, will appear to have used the HTTP
* protocol.
*
* The AppEngineRouting used to construct the URL that the task is
* delivered to can be set at the queue-level or task-level:
*
* * If app_engine_routing_override is set on the
* queue, this value is used for all
* tasks in the queue, no matter what the setting is for the task-level
* app_engine_routing.
*
*
* The `url` that the task will be sent to is:
*
* * `url =` host `+`
* relative_uri
*
* Tasks can be dispatched to secure app handlers, unsecure app handlers, and
* URIs restricted with
* [`login:
* admin`](https://cloud.google.com/appengine/docs/standard/python/config/appref).
* Because tasks are not run as any user, they cannot be dispatched to URIs
* restricted with
* [`login:
* required`](https://cloud.google.com/appengine/docs/standard/python/config/appref)
* Task dispatches also do not follow redirects.
*
* The task attempt has succeeded if the app's request handler returns an HTTP
* response code in the range [`200` - `299`]. The task attempt has failed if
* the app's handler returns a non-2xx response code or Cloud Tasks does
* not receive response before the deadline. Failed
* tasks will be retried according to the
* retry configuration. `503` (Service Unavailable) is
* considered an App Engine system error instead of an application error and
* will cause Cloud Tasks' traffic congestion control to temporarily throttle
* the queue's dispatches. Unlike other types of task targets, a `429` (Too Many
* Requests) response from an app handler does not cause traffic congestion
* control to throttle the queue.
*
* @property {number} httpMethod
* The HTTP method to use for the request. The default is POST.
*
* The app's request handler for the task's target URL must be able to handle
* HTTP requests with this http_method, otherwise the task attempt will fail
* with error code 405 (Method Not Allowed). See
* [Writing a push task request
* handler](https://cloud.google.com/appengine/docs/java/taskqueue/push/creating-handlers#writing_a_push_task_request_handler)
* and the documentation for the request handlers in the language your app is
* written in e.g.
* [Python Request
* Handler](https://cloud.google.com/appengine/docs/python/tools/webapp/requesthandlerclass).
*
* The number should be among the values of [HttpMethod]{@link google.cloud.tasks.v2.HttpMethod}
*
* @property {Object} appEngineRouting
* Task-level setting for App Engine routing.
*
* * If app_engine_routing_override is set on the
* queue, this value is used for all
* tasks in the queue, no matter what the setting is for the task-level
* app_engine_routing.
*
* This object should have the same structure as [AppEngineRouting]{@link google.cloud.tasks.v2.AppEngineRouting}
*
* @property {string} relativeUri
* The relative URI.
*
* The relative URI must begin with "/" and must be a valid HTTP relative URI.
* It can contain a path and query string arguments.
* If the relative URI is empty, then the root path "/" will be used.
* No spaces are allowed, and the maximum length allowed is 2083 characters.
*
* @property {Object.<string, string>} headers
* HTTP request headers.
*
* This map contains the header field names and values.
* Headers can be set when the
* task is created.
* Repeated headers are not supported but a header value can contain commas.
*
* Cloud Tasks sets some headers to default values:
*
* * `User-Agent`: By default, this header is
* `"AppEngine-Google; (+http://code.google.com/appengine)"`.
* This header can be modified, but Cloud Tasks will append
* `"AppEngine-Google; (+http://code.google.com/appengine)"` to the
* modified `User-Agent`.
*
* If the task has a body, Cloud
* Tasks sets the following headers:
*
* * `Content-Type`: By default, the `Content-Type` header is set to
* `"application/octet-stream"`. The default can be overridden by explicitly
* setting `Content-Type` to a particular media type when the
* task is created.
* For example, `Content-Type` can be set to `"application/json"`.
* * `Content-Length`: This is computed by Cloud Tasks. This value is
* output only. It cannot be changed.
*
* The headers below cannot be set or overridden:
*
* * `Host`
* * `X-Google-*`
* * `X-AppEngine-*`
*
* In addition, Cloud Tasks sets some headers when the task is dispatched,
* such as headers containing information about the task; see
* [request
* headers](https://cloud.google.com/appengine/docs/python/taskqueue/push/creating-handlers#reading_request_headers).
* These headers are set only when the task is dispatched, so they are not
* visible when the task is returned in a Cloud Tasks response.
*
* Although there is no specific limit for the maximum number of headers or
* the size, there is a limit on the maximum size of the Task. For more
* information, see the CreateTask documentation.
*
* @property {Buffer} body
* HTTP request body.
*
* A request body is allowed only if the HTTP method is POST or PUT. It is
* an error to set a body on a task with an incompatible HttpMethod.
*
* @typedef AppEngineHttpRequest
* @memberof google.cloud.tasks.v2
* @see [google.cloud.tasks.v2.AppEngineHttpRequest definition in proto format]{@link https://github.com/googleapis/googleapis/blob/master/google/cloud/tasks/v2/target.proto}
*/
const AppEngineHttpRequest = {
// This is for documentation. Actual contents will be loaded by gRPC.
};
/**
* App Engine Routing.
*
* Defines routing characteristics specific to App Engine - service, version,
* and instance.
*
* For more information about services, versions, and instances see
* [An Overview of App
* Engine](https://cloud.google.com/appengine/docs/python/an-overview-of-app-engine),
* [Microservices Architecture on Google App
* Engine](https://cloud.google.com/appengine/docs/python/microservices-on-app-engine),
* [App Engine Standard request
* routing](https://cloud.google.com/appengine/docs/standard/python/how-requests-are-routed),
* and [App Engine Flex request
* routing](https://cloud.google.com/appengine/docs/flexible/python/how-requests-are-routed).
*
* Using AppEngineRouting requires
* [`appengine.applications.get`](https://cloud.google.com/appengine/docs/admin-api/access-control)
* Google IAM permission for the project
* and the following scope:
*
* `https://www.googleapis.com/auth/cloud-platform`
*
* @property {string} service
* App service.
*
* By default, the task is sent to the service which is the default
* service when the task is attempted.
*
* For some queues or tasks which were created using the App Engine
* Task Queue API, host is not parsable
* into service,
* version, and
* instance. For example, some tasks
* which were created using the App Engine SDK use a custom domain
* name; custom domains are not parsed by Cloud Tasks. If
* host is not parsable, then
* service,
* version, and
* instance are the empty string.
*
* @property {string} version
* App version.
*
* By default, the task is sent to the version which is the default
* version when the task is attempted.
*
* For some queues or tasks which were created using the App Engine
* Task Queue API, host is not parsable
* into service,
* version, and
* instance. For example, some tasks
* which were created using the App Engine SDK use a custom domain
* name; custom domains are not parsed by Cloud Tasks. If
* host is not parsable, then
* service,
* version, and
* instance are the empty string.
*
* @property {string} instance
* App instance.
*
* By default, the task is sent to an instance which is available when
* the task is attempted.
*
* Requests can only be sent to a specific instance if
* [manual scaling is used in App Engine
* Standard](https://cloud.google.com/appengine/docs/python/an-overview-of-app-engine?hl=en_US#scaling_types_and_instance_classes).
* App Engine Flex does not support instances. For more information, see
* [App Engine Standard request
* routing](https://cloud.google.com/appengine/docs/standard/python/how-requests-are-routed)
* and [App Engine Flex request
* routing](https://cloud.google.com/appengine/docs/flexible/python/how-requests-are-routed).
*
* @property {string} host
* Output only. The host that the task is sent to.
*
* The host is constructed from the domain name of the app associated with
* the queue's project ID (for example <app-id>.appspot.com), and the
* service, version,
* and instance. Tasks which were created using
* the App Engine SDK might have a custom domain name.
*
* For more information, see
* [How Requests are
* Routed](https://cloud.google.com/appengine/docs/standard/python/how-requests-are-routed).
*
* @typedef AppEngineRouting
* @memberof google.cloud.tasks.v2
* @see [google.cloud.tasks.v2.AppEngineRouting definition in proto format]{@link https://github.com/googleapis/googleapis/blob/master/google/cloud/tasks/v2/target.proto}
*/
const AppEngineRouting = {
// This is for documentation. Actual contents will be loaded by gRPC.
};
/**
* Contains information needed for generating an
* [OAuth token](https://developers.google.com/identity/protocols/OAuth2).
* This type of authorization should generally only be used when calling Google
* APIs hosted on *.googleapis.com.
*
* @property {string} serviceAccountEmail
* [Service account email](https://cloud.google.com/iam/docs/service-accounts)
* to be used for generating OAuth token.
* The service account must be within the same project as the queue. The
* caller must have iam.serviceAccounts.actAs permission for the service
* account.
*
* @property {string} scope
* OAuth scope to be used for generating OAuth access token.
* If not specified, "https://www.googleapis.com/auth/cloud-platform"
* will be used.
*
* @typedef OAuthToken
* @memberof google.cloud.tasks.v2
* @see [google.cloud.tasks.v2.OAuthToken definition in proto format]{@link https://github.com/googleapis/googleapis/blob/master/google/cloud/tasks/v2/target.proto}
*/
const OAuthToken = {
// This is for documentation. Actual contents will be loaded by gRPC.
};
/**
* Contains information needed for generating an
* [OpenID Connect
* token](https://developers.google.com/identity/protocols/OpenIDConnect).
* This type of authorization can be used for many scenarios, including
* calling Cloud Run, or endpoints where you intend to validate the token
* yourself.
*
* @property {string} serviceAccountEmail
* [Service account email](https://cloud.google.com/iam/docs/service-accounts)
* to be used for generating OIDC token.
* The service account must be within the same project as the queue. The
* caller must have iam.serviceAccounts.actAs permission for the service
* account.
*
* @property {string} audience
* Audience to be used when generating OIDC token. If not specified, the URI
* specified in target will be used.
*
* @typedef OidcToken
* @memberof google.cloud.tasks.v2
* @see [google.cloud.tasks.v2.OidcToken definition in proto format]{@link https://github.com/googleapis/googleapis/blob/master/google/cloud/tasks/v2/target.proto}
*/
const OidcToken = {
// This is for documentation. Actual contents will be loaded by gRPC.
};
/**
* The HTTP method used to deliver the task.
*
* @enum {number}
* @memberof google.cloud.tasks.v2
*/
const HttpMethod = {
/**
* HTTP method unspecified
*/
HTTP_METHOD_UNSPECIFIED: 0,
/**
* HTTP POST
*/
POST: 1,
/**
* HTTP GET
*/
GET: 2,
/**
* HTTP HEAD
*/
HEAD: 3,
/**
* HTTP PUT
*/
PUT: 4,
/**
* HTTP DELETE
*/
DELETE: 5,
/**
* HTTP PATCH
*/
PATCH: 6,
/**
* HTTP OPTIONS
*/
OPTIONS: 7
};