Namespace Google.Apis.Networkconnectivity.v1.Data

Classes

AcceptHubSpokeRequest

The request for HubService.AcceptHubSpoke.

AcceptHubSpokeResponse

The response for HubService.AcceptHubSpoke.

Specifies the audit configuration for a service. The configuration determines which permission types are logged, and what identities, if any, are exempted from logging. An AuditConfig must have one or more AuditLogConfigs. If there are AuditConfigs for both allServices and a specific service, the union of the two AuditConfigs is used for that service: the log_types specified in each AuditConfig are enabled, and the exempted_members in each AuditLogConfig are exempted. Example Policy with multiple AuditConfigs: { "audit_configs": [ { "service": "allServices", "audit_log_configs": [ { "log_type": "DATA_READ", "exempted_members": [ "user:jose@example.com" ] }, { "log_type": "DATA_WRITE" }, { "log_type": "ADMIN_READ" } ] }, { "service": "sampleservice.googleapis.com", "audit_log_configs": [ { "log_type": "DATA_READ" }, { "log_type": "DATA_WRITE", "exempted_members": [ "user:aliya@example.com" ] } ] } ] } For sampleservice, this policy enables DATA_READ, DATA_WRITE and ADMIN_READ logging. It also exempts jose@example.com from DATA_READ logging, and aliya@example.com from DATA_WRITE logging.

AuditLogConfig

Provides the configuration for logging a type of permissions. Example: { "audit_log_configs": [ { "log_type": "DATA_READ", "exempted_members": [ "user:jose@example.com" ] }, { "log_type": "DATA_WRITE" } ] } This enables 'DATA_READ' and 'DATA_WRITE' logging, while exempting jose@example.com from DATA_READ logging.

AutoAccept

The auto-accept setting for a group controls whether proposed spokes are automatically attached to the hub. If auto-accept is enabled, the spoke immediately is attached to the hub and becomes part of the group. In this case, the new spoke is in the ACTIVE state. If auto-accept is disabled, the spoke goes to the INACTIVE state, and it must be reviewed and accepted by a hub administrator.

Binding

Associates members, or principals, with a role.

ConsumerPscConfig

Allow the producer to specify which consumers can connect to it.

ConsumerPscConnection

PSC connection details on consumer side.

Empty

A generic empty message that you can re-use to avoid defining duplicated empty messages in your APIs. A typical example is to use it as the request or the response type of an API method. For instance: service Foo { rpc Bar(google.protobuf.Empty) returns (google.protobuf.Empty); }

Expr

Represents a textual expression in the Common Expression Language (CEL) syntax. CEL is a C-like expression language. The syntax and semantics of CEL are documented at https://github.com/google/cel-spec. Example (Comparison): title: "Summary size limit" description: "Determines if a summary is less than 100 chars" expression: "document.summary.size() < 100" Example (Equality): title: "Requestor is owner" description: "Determines if requestor is the document owner" expression: "document.owner == request.auth.claims.email" Example (Logic): title: "Public documents" description: "Determine whether the document should be publicly visible" expression: "document.type != 'private' && document.type != 'internal'" Example (Data Manipulation): title: "Notification string" description: "Create a notification string with a timestamp." expression: "'New message received at ' + string(document.create_time)" The exact variables and functions that may be referenced within an expression are determined by the service that evaluates it. See the service documentation for additional information.

Filter

Filter matches L4 traffic.

GoogleLongrunningCancelOperationRequest

The request message for Operations.CancelOperation.

GoogleLongrunningListOperationsResponse

The response message for Operations.ListOperations.

GoogleLongrunningOperation

This resource represents a long-running operation that is the result of a network API call.

GoogleRpcErrorInfo

Describes the cause of the error with structured details. Example of an error when contacting the "pubsub.googleapis.com" API when it is not enabled: { "reason": "API_DISABLED" "domain": "googleapis.com" "metadata": { "resource": "projects/123", "service": "pubsub.googleapis.com" } } This response indicates that the pubsub.googleapis.com API is not enabled. Example of an error that is returned when attempting to create a Spanner instance in a region that is out of stock: { "reason": "STOCKOUT" "domain": "spanner.googleapis.com", "metadata": { "availableRegions": "us-central1,us-east2" } }

GoogleRpcStatus

The Status type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by gRPC. Each Status message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the API Design Guide.

Group

A group represents a subset of spokes attached to a hub.

Hub

A Network Connectivity Center hub is a global management resource to which you attach spokes. A single hub can contain spokes from multiple regions. However, if any of a hub's spokes use the site-to-site data transfer feature, the resources associated with those spokes must all be in the same VPC network. Spokes that do not use site-to-site data transfer can be associated with any VPC network in your project.

HubStatusEntry

The hub status entry.

InterconnectAttachment

InterconnectAttachment that this route applies to.

InternalRange

The internal range resource for IPAM operations within a VPC network. Used to represent a private address range along with behavioral characterstics of that range (its usage and peering behavior). Networking resources can link to this range if they are created as belonging to it.

LinkedInterconnectAttachments

A collection of VLAN attachment resources. These resources should be redundant attachments that all advertise the same prefixes to Google Cloud. Alternatively, in active/passive configurations, all attachments should be capable of advertising the same prefixes.

LinkedProducerVpcNetwork

LinkedRouterApplianceInstances

A collection of router appliance instances. If you configure multiple router appliance instances to receive data from the same set of sites outside of Google Cloud, we recommend that you associate those instances with the same spoke.

LinkedVpcNetwork

An existing VPC network.

LinkedVpnTunnels

A collection of Cloud VPN tunnel resources. These resources should be redundant HA VPN tunnels that all advertise the same prefixes to Google Cloud. Alternatively, in a passive/active configuration, all tunnels should be capable of advertising the same prefixes.

ListGroupsResponse

Response for HubService.ListGroups method.

ListHubSpokesResponse

The response for HubService.ListHubSpokes.

ListHubsResponse

Response for HubService.ListHubs method.

ListInternalRangesResponse

Response for InternalRange.ListInternalRanges

ListLocationsResponse

The response message for Locations.ListLocations.

ListPolicyBasedRoutesResponse

Response for PolicyBasedRouting.ListPolicyBasedRoutes method.

ListRegionalEndpointsResponse

Response for ListRegionalEndpoints.

ListRouteTablesResponse

Response for HubService.ListRouteTables method.

ListRoutesResponse

Response for HubService.ListRoutes method.

ListServiceClassesResponse

Response for ListServiceClasses.

ListServiceConnectionMapsResponse

Response for ListServiceConnectionMaps.

ListServiceConnectionPoliciesResponse

Response for ListServiceConnectionPolicies.

ListServiceConnectionTokensResponse

Response for ListServiceConnectionTokens.

ListSpokesResponse

The response for HubService.ListSpokes.

Location

A resource that represents a Google Cloud location.

LocationMetadata

Metadata about locations

Migration

Specification for migration with source and target resource names.

NextHopInterconnectAttachment

A route next hop that leads to an interconnect attachment resource.

NextHopRouterApplianceInstance

A route next hop that leads to a Router appliance instance.

NextHopVPNTunnel

A route next hop that leads to a VPN tunnel resource.

NextHopVpcNetwork

OperationMetadata

Represents the metadata of the long-running operation.

Policy

An Identity and Access Management (IAM) policy, which specifies access controls for Google Cloud resources. A Policy is a collection of bindings. A binding binds one or more members, or principals, to a single role. Principals can be user accounts, service accounts, Google groups, and domains (such as G Suite). A role is a named list of permissions; each role can be an IAM predefined role or a user-created custom role. For some types of Google Cloud resources, a binding can also specify a condition, which is a logical expression that allows access to a resource only if the expression evaluates to true. A condition can add constraints based on attributes of the request, the resource, or both. To learn which resources support conditions in their IAM policies, see the IAM documentation. JSON example:

{
"bindings": [ { "role": "roles/resourcemanager.organizationAdmin", "members": [ "user:mike@example.com",
"group:admins@example.com", "domain:google.com", "serviceAccount:my-project-id@appspot.gserviceaccount.com" ] },
{ "role": "roles/resourcemanager.organizationViewer", "members": [ "user:eve@example.com" ], "condition": {
"title": "expirable access", "description": "Does not grant access after Sep 2020", "expression": "request.time
&lt; timestamp('2020-10-01T00:00:00.000Z')", } } ], "etag": "BwWWja0YfJA=", "version": 3 }

YAML example:

bindings: - members: - user:mike@example.com - group:admins@example.com - domain:google.com -
serviceAccount:my-project-id@appspot.gserviceaccount.com role: roles/resourcemanager.organizationAdmin -
members: - user:eve@example.com role: roles/resourcemanager.organizationViewer condition: title: expirable
access description: Does not grant access after Sep 2020 expression: request.time &lt;
timestamp('2020-10-01T00:00:00.000Z') etag: BwWWja0YfJA= version: 3

For a description of IAM and its features, see the IAM documentation.

PolicyBasedRoute

Policy-based routes route L4 network traffic based on not just destination IP address, but also source IP address, protocol, and more. If a policy-based route conflicts with other types of routes, the policy-based route always takes precedence.

ProducerPscConfig

The PSC configurations on producer side.

PscConfig

Configuration used for Private Service Connect connections. Used when Infrastructure is PSC.

PscConnection

Information about a specific Private Service Connect connection.

PscPropagationStatus

The PSC propagation status in a hub.

QueryHubStatusResponse

The response for HubService.QueryHubStatus.

RegionalEndpoint

The RegionalEndpoint resource.

RejectHubSpokeRequest

The request for HubService.RejectHubSpoke.

RejectHubSpokeResponse

The response for HubService.RejectHubSpoke.

Route

A route defines a path from VM instances within a spoke to a specific destination resource. Only VPC spokes have routes.

RouteTable

RouterApplianceInstance

A router appliance instance is a Compute Engine virtual machine (VM) instance that acts as a BGP speaker. A router appliance instance is specified by the URI of the VM and the internal IP address of one of the VM's network interfaces.

RoutingVPC

RoutingVPC contains information about the VPC networks associated with the spokes of a Network Connectivity Center hub.

ServiceClass

The ServiceClass resource.

ServiceConnectionMap

The ServiceConnectionMap resource.

ServiceConnectionPolicy

The ServiceConnectionPolicy resource.

ServiceConnectionToken

The ServiceConnectionToken resource.

SetIamPolicyRequest

Request message for SetIamPolicy method.

Spoke

A Network Connectivity Center spoke represents one or more network connectivity resources. When you create a spoke, you associate it with a hub. You must also identify a value for exactly one of the following fields: * linked_vpn_tunnels * linked_interconnect_attachments * linked_router_appliance_instances * linked_vpc_network

SpokeStateCount

The number of spokes that are in a particular state and associated with a given hub.

SpokeStateReasonCount

The number of spokes in the hub that are inactive for this reason.

SpokeSummary

Summarizes information about the spokes associated with a hub. The summary includes a count of spokes according to type and according to state. If any spokes are inactive, the summary also lists the reasons they are inactive, including a count for each reason.