public static final class TransactionOptions.Builder extends GeneratedMessageV3.Builder<TransactionOptions.Builder> implements TransactionOptionsOrBuilder
Transactions:
Each session can have at most one active transaction at a time (note that
standalone reads and queries use a transaction internally and do count
towards the one transaction limit). After the active transaction is
completed, the session can immediately be re-used for the next transaction.
It is not necessary to create a new session for each transaction.
Transaction Modes:
Cloud Spanner supports three transaction modes:
1. Locking read-write. This type of transaction is the only way
to write data into Cloud Spanner. These transactions rely on
pessimistic locking and, if necessary, two-phase commit.
Locking read-write transactions may abort, requiring the
application to retry.
2. Snapshot read-only. This transaction type provides guaranteed
consistency across several reads, but does not allow
writes. Snapshot read-only transactions can be configured to
read at timestamps in the past. Snapshot read-only
transactions do not need to be committed.
3. Partitioned DML. This type of transaction is used to execute
a single Partitioned DML statement. Partitioned DML partitions
the key space and runs the DML statement over each partition
in parallel using separate, internal transactions that commit
independently. Partitioned DML transactions do not need to be
committed.
For transactions that only read, snapshot read-only transactions
provide simpler semantics and are almost always faster. In
particular, read-only transactions do not take locks, so they do
not conflict with read-write transactions. As a consequence of not
taking locks, they also do not abort, so retry loops are not needed.
Transactions may only read/write data in a single database. They
may, however, read/write data in different tables within that
database.
Locking Read-Write Transactions:
Locking transactions may be used to atomically read-modify-write
data anywhere in a database. This type of transaction is externally
consistent.
Clients should attempt to minimize the amount of time a transaction
is active. Faster transactions commit with higher probability
and cause less contention. Cloud Spanner attempts to keep read locks
active as long as the transaction continues to do reads, and the
transaction has not been terminated by
[Commit][google.spanner.v1.Spanner.Commit] or
[Rollback][google.spanner.v1.Spanner.Rollback]. Long periods of
inactivity at the client may cause Cloud Spanner to release a
transaction's locks and abort it.
Conceptually, a read-write transaction consists of zero or more
reads or SQL statements followed by
[Commit][google.spanner.v1.Spanner.Commit]. At any time before
[Commit][google.spanner.v1.Spanner.Commit], the client can send a
[Rollback][google.spanner.v1.Spanner.Rollback] request to abort the
transaction.
Semantics:
Cloud Spanner can commit the transaction if all read locks it acquired
are still valid at commit time, and it is able to acquire write
locks for all writes. Cloud Spanner can abort the transaction for any
reason. If a commit attempt returns `ABORTED`, Cloud Spanner guarantees
that the transaction has not modified any user data in Cloud Spanner.
Unless the transaction commits, Cloud Spanner makes no guarantees about
how long the transaction's locks were held for. It is an error to
use Cloud Spanner locks for any sort of mutual exclusion other than
between Cloud Spanner transactions themselves.
Retrying Aborted Transactions:
When a transaction aborts, the application can choose to retry the
whole transaction again. To maximize the chances of successfully
committing the retry, the client should execute the retry in the
same session as the original attempt. The original session's lock
priority increases with each consecutive abort, meaning that each
attempt has a slightly better chance of success than the previous.
Under some circumstances (for example, many transactions attempting to
modify the same row(s)), a transaction can abort many times in a
short period before successfully committing. Thus, it is not a good
idea to cap the number of retries a transaction can attempt;
instead, it is better to limit the total amount of time spent
retrying.
Idle Transactions:
A transaction is considered idle if it has no outstanding reads or
SQL queries and has not started a read or SQL query within the last 10
seconds. Idle transactions can be aborted by Cloud Spanner so that they
don't hold on to locks indefinitely. If an idle transaction is aborted, the
commit will fail with error `ABORTED`.
If this behavior is undesirable, periodically executing a simple
SQL query in the transaction (for example, `SELECT 1`) prevents the
transaction from becoming idle.
Snapshot Read-Only Transactions:
Snapshot read-only transactions provides a simpler method than
locking read-write transactions for doing several consistent
reads. However, this type of transaction does not support writes.
Snapshot transactions do not take locks. Instead, they work by
choosing a Cloud Spanner timestamp, then executing all reads at that
timestamp. Since they do not acquire locks, they do not block
concurrent read-write transactions.
Unlike locking read-write transactions, snapshot read-only
transactions never abort. They can fail if the chosen read
timestamp is garbage collected; however, the default garbage
collection policy is generous enough that most applications do not
need to worry about this in practice.
Snapshot read-only transactions do not need to call
[Commit][google.spanner.v1.Spanner.Commit] or
[Rollback][google.spanner.v1.Spanner.Rollback] (and in fact are not
permitted to do so).
To execute a snapshot transaction, the client specifies a timestamp
bound, which tells Cloud Spanner how to choose a read timestamp.
The types of timestamp bound are:
- Strong (the default).
- Bounded staleness.
- Exact staleness.
If the Cloud Spanner database to be read is geographically distributed,
stale read-only transactions can execute more quickly than strong
or read-write transaction, because they are able to execute far
from the leader replica.
Each type of timestamp bound is discussed in detail below.
Strong:
Strong reads are guaranteed to see the effects of all transactions
that have committed before the start of the read. Furthermore, all
rows yielded by a single read are consistent with each other -- if
any part of the read observes a transaction, all parts of the read
see the transaction.
Strong reads are not repeatable: two consecutive strong read-only
transactions might return inconsistent results if there are
concurrent writes. If consistency across reads is required, the
reads should be executed within a transaction or at an exact read
timestamp.
See [TransactionOptions.ReadOnly.strong][google.spanner.v1.TransactionOptions.ReadOnly.strong].
Exact Staleness:
These timestamp bounds execute reads at a user-specified
timestamp. Reads at a timestamp are guaranteed to see a consistent
prefix of the global transaction history: they observe
modifications done by all transactions with a commit timestamp less than or
equal to the read timestamp, and observe none of the modifications done by
transactions with a larger commit timestamp. They will block until
all conflicting transactions that may be assigned commit timestamps
<= the read timestamp have finished.
The timestamp can either be expressed as an absolute Cloud Spanner commit
timestamp or a staleness relative to the current time.
These modes do not require a "negotiation phase" to pick a
timestamp. As a result, they execute slightly faster than the
equivalent boundedly stale concurrency modes. On the other hand,
boundedly stale reads usually return fresher results.
See [TransactionOptions.ReadOnly.read_timestamp][google.spanner.v1.TransactionOptions.ReadOnly.read_timestamp] and
[TransactionOptions.ReadOnly.exact_staleness][google.spanner.v1.TransactionOptions.ReadOnly.exact_staleness].
Bounded Staleness:
Bounded staleness modes allow Cloud Spanner to pick the read timestamp,
subject to a user-provided staleness bound. Cloud Spanner chooses the
newest timestamp within the staleness bound that allows execution
of the reads at the closest available replica without blocking.
All rows yielded are consistent with each other -- if any part of
the read observes a transaction, all parts of the read see the
transaction. Boundedly stale reads are not repeatable: two stale
reads, even if they use the same staleness bound, can execute at
different timestamps and thus return inconsistent results.
Boundedly stale reads execute in two phases: the first phase
negotiates a timestamp among all replicas needed to serve the
read. In the second phase, reads are executed at the negotiated
timestamp.
As a result of the two phase execution, bounded staleness reads are
usually a little slower than comparable exact staleness
reads. However, they are typically able to return fresher
results, and are more likely to execute at the closest replica.
Because the timestamp negotiation requires up-front knowledge of
which rows will be read, it can only be used with single-use
read-only transactions.
See [TransactionOptions.ReadOnly.max_staleness][google.spanner.v1.TransactionOptions.ReadOnly.max_staleness] and
[TransactionOptions.ReadOnly.min_read_timestamp][google.spanner.v1.TransactionOptions.ReadOnly.min_read_timestamp].
Old Read Timestamps and Garbage Collection:
Cloud Spanner continuously garbage collects deleted and overwritten data
in the background to reclaim storage space. This process is known
as "version GC". By default, version GC reclaims versions after they
are one hour old. Because of this, Cloud Spanner cannot perform reads
at read timestamps more than one hour in the past. This
restriction also applies to in-progress reads and/or SQL queries whose
timestamp become too old while executing. Reads and SQL queries with
too-old read timestamps fail with the error `FAILED_PRECONDITION`.
Partitioned DML Transactions:
Partitioned DML transactions are used to execute DML statements with a
different execution strategy that provides different, and often better,
scalability properties for large, table-wide operations than DML in a
ReadWrite transaction. Smaller scoped statements, such as an OLTP workload,
should prefer using ReadWrite transactions.
Partitioned DML partitions the keyspace and runs the DML statement on each
partition in separate, internal transactions. These transactions commit
automatically when complete, and run independently from one another.
To reduce lock contention, this execution strategy only acquires read locks
on rows that match the WHERE clause of the statement. Additionally, the
smaller per-partition transactions hold locks for less time.
That said, Partitioned DML is not a drop-in replacement for standard DML used
in ReadWrite transactions.
- The DML statement must be fully-partitionable. Specifically, the statement
must be expressible as the union of many statements which each access only
a single row of the table.
- The statement is not applied atomically to all rows of the table. Rather,
the statement is applied atomically to partitions of the table, in
independent transactions. Secondary index rows are updated atomically
with the base table rows.
- Partitioned DML does not guarantee exactly-once execution semantics
against a partition. The statement will be applied at least once to each
partition. It is strongly recommended that the DML statement should be
idempotent to avoid unexpected results. For instance, it is potentially
dangerous to run a statement such as
`UPDATE table SET column = column + 1` as it could be run multiple times
against some rows.
- The partitions are committed automatically - there is no support for
Commit or Rollback. If the call returns an error, or if the client issuing
the ExecuteSql call dies, it is possible that some rows had the statement
executed on them successfully. It is also possible that statement was
never executed against other rows.
- Partitioned DML transactions may only contain the execution of a single
DML statement via ExecuteSql or ExecuteStreamingSql.
- If any error is encountered during the execution of the partitioned DML
operation (for instance, a UNIQUE INDEX violation, division by zero, or a
value that cannot be stored due to schema constraints), then the
operation is stopped at that point and an error is returned. It is
possible that at this point, some partitions have been committed (or even
committed multiple times), and other partitions have not been run at all.
Given the above, Partitioned DML is good fit for large, database-wide,
operations that are idempotent, such as deleting old rows from a very large
table.
Protobuf type google.spanner.v1.TransactionOptionsgetAllFields, getField, getFieldBuilder, getOneofFieldDescriptor, getParentForChildren, getRepeatedField, getRepeatedFieldBuilder, getRepeatedFieldCount, getUnknownFields, hasField, hasOneof, internalGetMapField, internalGetMutableMapField, isClean, markClean, newBuilderForField, onBuilt, onChanged, setUnknownFieldsProto3findInitializationErrors, getInitializationErrorString, internalMergeFrom, mergeFrom, mergeFrom, mergeFrom, mergeFrom, mergeFrom, mergeFrom, mergeFrom, mergeFrom, mergeFrom, newUninitializedMessageException, toStringaddAll, addAll, mergeDelimitedFrom, mergeDelimitedFrom, mergeFrom, newUninitializedMessageExceptionequals, finalize, getClass, hashCode, notify, notifyAll, wait, wait, waitfindInitializationErrors, getAllFields, getField, getInitializationErrorString, getOneofFieldDescriptor, getRepeatedField, getRepeatedFieldCount, getUnknownFields, hasField, hasOneofmergeDelimitedFrom, mergeDelimitedFrommergeFrompublic static final Descriptors.Descriptor getDescriptor()
protected GeneratedMessageV3.FieldAccessorTable internalGetFieldAccessorTable()
internalGetFieldAccessorTable in class GeneratedMessageV3.Builder<TransactionOptions.Builder>public TransactionOptions.Builder clear()
clear in interface Message.Builderclear in interface MessageLite.Builderclear in class GeneratedMessageV3.Builder<TransactionOptions.Builder>public Descriptors.Descriptor getDescriptorForType()
getDescriptorForType in interface Message.BuildergetDescriptorForType in interface MessageOrBuildergetDescriptorForType in class GeneratedMessageV3.Builder<TransactionOptions.Builder>public TransactionOptions getDefaultInstanceForType()
getDefaultInstanceForType in interface MessageLiteOrBuildergetDefaultInstanceForType in interface MessageOrBuilderpublic TransactionOptions build()
build in interface Message.Builderbuild in interface MessageLite.Builderpublic TransactionOptions buildPartial()
buildPartial in interface Message.BuilderbuildPartial in interface MessageLite.Builderpublic TransactionOptions.Builder clone()
clone in interface Message.Builderclone in interface MessageLite.Builderclone in class GeneratedMessageV3.Builder<TransactionOptions.Builder>public TransactionOptions.Builder setField(Descriptors.FieldDescriptor field, Object value)
setField in interface Message.BuildersetField in class GeneratedMessageV3.Builder<TransactionOptions.Builder>public TransactionOptions.Builder clearField(Descriptors.FieldDescriptor field)
clearField in interface Message.BuilderclearField in class GeneratedMessageV3.Builder<TransactionOptions.Builder>public TransactionOptions.Builder clearOneof(Descriptors.OneofDescriptor oneof)
clearOneof in interface Message.BuilderclearOneof in class GeneratedMessageV3.Builder<TransactionOptions.Builder>public TransactionOptions.Builder setRepeatedField(Descriptors.FieldDescriptor field, int index, Object value)
setRepeatedField in interface Message.BuildersetRepeatedField in class GeneratedMessageV3.Builder<TransactionOptions.Builder>public TransactionOptions.Builder addRepeatedField(Descriptors.FieldDescriptor field, Object value)
addRepeatedField in interface Message.BuilderaddRepeatedField in class GeneratedMessageV3.Builder<TransactionOptions.Builder>public TransactionOptions.Builder mergeFrom(Message other)
mergeFrom in interface Message.BuildermergeFrom in class AbstractMessage.Builder<TransactionOptions.Builder>public TransactionOptions.Builder mergeFrom(TransactionOptions other)
public final boolean isInitialized()
isInitialized in interface MessageLiteOrBuilderisInitialized in class GeneratedMessageV3.Builder<TransactionOptions.Builder>public TransactionOptions.Builder mergeFrom(CodedInputStream input, ExtensionRegistryLite extensionRegistry) throws IOException
mergeFrom in interface Message.BuildermergeFrom in interface MessageLite.BuildermergeFrom in class AbstractMessage.Builder<TransactionOptions.Builder>IOExceptionpublic TransactionOptions.ModeCase getModeCase()
getModeCase in interface TransactionOptionsOrBuilderpublic TransactionOptions.Builder clearMode()
public boolean hasReadWrite()
Transaction may write. Authorization to begin a read-write transaction requires `spanner.databases.beginOrRollbackReadWriteTransaction` permission on the `session` resource.
.google.spanner.v1.TransactionOptions.ReadWrite read_write = 1;hasReadWrite in interface TransactionOptionsOrBuilderpublic TransactionOptions.ReadWrite getReadWrite()
Transaction may write. Authorization to begin a read-write transaction requires `spanner.databases.beginOrRollbackReadWriteTransaction` permission on the `session` resource.
.google.spanner.v1.TransactionOptions.ReadWrite read_write = 1;getReadWrite in interface TransactionOptionsOrBuilderpublic TransactionOptions.Builder setReadWrite(TransactionOptions.ReadWrite value)
Transaction may write. Authorization to begin a read-write transaction requires `spanner.databases.beginOrRollbackReadWriteTransaction` permission on the `session` resource.
.google.spanner.v1.TransactionOptions.ReadWrite read_write = 1;public TransactionOptions.Builder setReadWrite(TransactionOptions.ReadWrite.Builder builderForValue)
Transaction may write. Authorization to begin a read-write transaction requires `spanner.databases.beginOrRollbackReadWriteTransaction` permission on the `session` resource.
.google.spanner.v1.TransactionOptions.ReadWrite read_write = 1;public TransactionOptions.Builder mergeReadWrite(TransactionOptions.ReadWrite value)
Transaction may write. Authorization to begin a read-write transaction requires `spanner.databases.beginOrRollbackReadWriteTransaction` permission on the `session` resource.
.google.spanner.v1.TransactionOptions.ReadWrite read_write = 1;public TransactionOptions.Builder clearReadWrite()
Transaction may write. Authorization to begin a read-write transaction requires `spanner.databases.beginOrRollbackReadWriteTransaction` permission on the `session` resource.
.google.spanner.v1.TransactionOptions.ReadWrite read_write = 1;public TransactionOptions.ReadWrite.Builder getReadWriteBuilder()
Transaction may write. Authorization to begin a read-write transaction requires `spanner.databases.beginOrRollbackReadWriteTransaction` permission on the `session` resource.
.google.spanner.v1.TransactionOptions.ReadWrite read_write = 1;public TransactionOptions.ReadWriteOrBuilder getReadWriteOrBuilder()
Transaction may write. Authorization to begin a read-write transaction requires `spanner.databases.beginOrRollbackReadWriteTransaction` permission on the `session` resource.
.google.spanner.v1.TransactionOptions.ReadWrite read_write = 1;getReadWriteOrBuilder in interface TransactionOptionsOrBuilderpublic boolean hasPartitionedDml()
Partitioned DML transaction. Authorization to begin a Partitioned DML transaction requires `spanner.databases.beginPartitionedDmlTransaction` permission on the `session` resource.
.google.spanner.v1.TransactionOptions.PartitionedDml partitioned_dml = 3;hasPartitionedDml in interface TransactionOptionsOrBuilderpublic TransactionOptions.PartitionedDml getPartitionedDml()
Partitioned DML transaction. Authorization to begin a Partitioned DML transaction requires `spanner.databases.beginPartitionedDmlTransaction` permission on the `session` resource.
.google.spanner.v1.TransactionOptions.PartitionedDml partitioned_dml = 3;getPartitionedDml in interface TransactionOptionsOrBuilderpublic TransactionOptions.Builder setPartitionedDml(TransactionOptions.PartitionedDml value)
Partitioned DML transaction. Authorization to begin a Partitioned DML transaction requires `spanner.databases.beginPartitionedDmlTransaction` permission on the `session` resource.
.google.spanner.v1.TransactionOptions.PartitionedDml partitioned_dml = 3;public TransactionOptions.Builder setPartitionedDml(TransactionOptions.PartitionedDml.Builder builderForValue)
Partitioned DML transaction. Authorization to begin a Partitioned DML transaction requires `spanner.databases.beginPartitionedDmlTransaction` permission on the `session` resource.
.google.spanner.v1.TransactionOptions.PartitionedDml partitioned_dml = 3;public TransactionOptions.Builder mergePartitionedDml(TransactionOptions.PartitionedDml value)
Partitioned DML transaction. Authorization to begin a Partitioned DML transaction requires `spanner.databases.beginPartitionedDmlTransaction` permission on the `session` resource.
.google.spanner.v1.TransactionOptions.PartitionedDml partitioned_dml = 3;public TransactionOptions.Builder clearPartitionedDml()
Partitioned DML transaction. Authorization to begin a Partitioned DML transaction requires `spanner.databases.beginPartitionedDmlTransaction` permission on the `session` resource.
.google.spanner.v1.TransactionOptions.PartitionedDml partitioned_dml = 3;public TransactionOptions.PartitionedDml.Builder getPartitionedDmlBuilder()
Partitioned DML transaction. Authorization to begin a Partitioned DML transaction requires `spanner.databases.beginPartitionedDmlTransaction` permission on the `session` resource.
.google.spanner.v1.TransactionOptions.PartitionedDml partitioned_dml = 3;public TransactionOptions.PartitionedDmlOrBuilder getPartitionedDmlOrBuilder()
Partitioned DML transaction. Authorization to begin a Partitioned DML transaction requires `spanner.databases.beginPartitionedDmlTransaction` permission on the `session` resource.
.google.spanner.v1.TransactionOptions.PartitionedDml partitioned_dml = 3;getPartitionedDmlOrBuilder in interface TransactionOptionsOrBuilderpublic boolean hasReadOnly()
Transaction will not write. Authorization to begin a read-only transaction requires `spanner.databases.beginReadOnlyTransaction` permission on the `session` resource.
.google.spanner.v1.TransactionOptions.ReadOnly read_only = 2;hasReadOnly in interface TransactionOptionsOrBuilderpublic TransactionOptions.ReadOnly getReadOnly()
Transaction will not write. Authorization to begin a read-only transaction requires `spanner.databases.beginReadOnlyTransaction` permission on the `session` resource.
.google.spanner.v1.TransactionOptions.ReadOnly read_only = 2;getReadOnly in interface TransactionOptionsOrBuilderpublic TransactionOptions.Builder setReadOnly(TransactionOptions.ReadOnly value)
Transaction will not write. Authorization to begin a read-only transaction requires `spanner.databases.beginReadOnlyTransaction` permission on the `session` resource.
.google.spanner.v1.TransactionOptions.ReadOnly read_only = 2;public TransactionOptions.Builder setReadOnly(TransactionOptions.ReadOnly.Builder builderForValue)
Transaction will not write. Authorization to begin a read-only transaction requires `spanner.databases.beginReadOnlyTransaction` permission on the `session` resource.
.google.spanner.v1.TransactionOptions.ReadOnly read_only = 2;public TransactionOptions.Builder mergeReadOnly(TransactionOptions.ReadOnly value)
Transaction will not write. Authorization to begin a read-only transaction requires `spanner.databases.beginReadOnlyTransaction` permission on the `session` resource.
.google.spanner.v1.TransactionOptions.ReadOnly read_only = 2;public TransactionOptions.Builder clearReadOnly()
Transaction will not write. Authorization to begin a read-only transaction requires `spanner.databases.beginReadOnlyTransaction` permission on the `session` resource.
.google.spanner.v1.TransactionOptions.ReadOnly read_only = 2;public TransactionOptions.ReadOnly.Builder getReadOnlyBuilder()
Transaction will not write. Authorization to begin a read-only transaction requires `spanner.databases.beginReadOnlyTransaction` permission on the `session` resource.
.google.spanner.v1.TransactionOptions.ReadOnly read_only = 2;public TransactionOptions.ReadOnlyOrBuilder getReadOnlyOrBuilder()
Transaction will not write. Authorization to begin a read-only transaction requires `spanner.databases.beginReadOnlyTransaction` permission on the `session` resource.
.google.spanner.v1.TransactionOptions.ReadOnly read_only = 2;getReadOnlyOrBuilder in interface TransactionOptionsOrBuilderpublic final TransactionOptions.Builder setUnknownFields(UnknownFieldSet unknownFields)
setUnknownFields in interface Message.BuildersetUnknownFields in class GeneratedMessageV3.Builder<TransactionOptions.Builder>public final TransactionOptions.Builder mergeUnknownFields(UnknownFieldSet unknownFields)
mergeUnknownFields in interface Message.BuildermergeUnknownFields in class GeneratedMessageV3.Builder<TransactionOptions.Builder>Copyright © 2022 Google LLC. All rights reserved.